Description
Overview
A focused polishing-pad cleaning brush with an angled handle for scrubbing compound, polish, wax and sealant residue from foam pads.
Key details
- Use with suitable pad cleaner and water
- Rinse thoroughly and dry pads before reuse
Use and care
- When polishing the polish and compounds and waxes used get inside the foam of the polishing pad, if you leave this they will dry inside the foam of the pad itself creating hard spots.
- Have a sink or bucket of clean water, spray Pad Cleaner onto the pad and scrub with the pad cleaning brush.
- Rinse in the bucket/sink or under running water, squeeze to push out all the loosed product from inside the foam of the pad, repeat until the pads are clean.
- Dry your pads either vertically or valcro up so that water can drain away does not sit on top of the valcro back.
- Always clean your pads the same day as you used them, do not let them dry over night.
- Wait for the pads to dry fully before reusing them so that water still on the pad does not dilute your products, and so that the pad is dry and hard, do not polish with wet pads.